The headset on a bike is the most important bearing on the bike. It allows you to balance the forces while you're riding so you don't fall over. If it's too loose or too tight the bike may be uncomfortable to ride and the headset will wear out faster than if it's correctly adjusted
Required tools coming soon.
Parts list coming soon.
Grab the rear section of the bike – the part connected to the back wheel – at the front of the top tube. Lift the front wheel off the ground. Turn the bars. They should rotate smoothly left to right with no clicks or sticking points. The most likely problem is the front wheel tending to rest at the straighter head point.
Watch out for interference from any control cables. It may give a false negative.
With the front wheel on the ground jam on the front brake. Push the bike forward from the handlebars. The back wheel should lift off the ground with no hesitation, no play between the handlebars and fork and the rear section of the bike.
Detecting play in the headset on a bike
You can detect tiny amounts of play in a headset on a bike by placing your finger at the point where the top tube meets the forks when make your check.
Checks during adjustment of a threadless steerer headset are made while the handlebars are unlocked. Do the ‘too tight’ test by turning the wheel, and the ‘too loose’ test using the method described below.
If the bike has no front brake or telescopic forks turn the front wheel perpendicular to the back wheel and push the bike forward to detect any play in a headset on a bike.