factsheet
Flat handlebars are usually sold in a one-side-fits-all format so new ones are too wide for almost all riders. For most applications the Handlebars don't need to be wider than the rider's shoulders.
Required tools coming soon.
Parts list coming soon.
Move The Controls
Step 1
If you’re not sure about trimming your handlebars move the controls inwards and spend some time riding in that position before you cut. Once you cut there’s no going back.
Measure
Step 2
Make sure the handlebars are centred in their clamp. That exactly the same distance sticks out on each side. When you’ve decided how much you want to trim, mark the cut-line by scratching the bars with a file. Measure the amount to be cut off and scratch a line on the other side with a file.
Start Carefully
Step 3
Position a rag to gather the metal dust and make sure it won’t get into moving parts. Begin the cut by dragging the hack-saw blade toward you a few times.
Cut Handlebars carefully
Step 4
Saw gently keeping the blade square to the handlebars.
File Clean
Step 5
Use a file to remove any burrs. Repeat on the other side.
